THINKWARE DASH CAM X800
QHD & FHD 2CH, Energy Saving Mode
2K QHD - Full HD 2CH | 150° Wide Angle | SONY STARVIS IMAGE SENSOR
Super Night Vision 2.0 | Advanced Video Clear Technology | Energy Saving Mode | Time Lapse
2.7” TOUCHSCREEN LCD | Safety Camera Alert | Road Safety Warning System (LDWS, FCWS, uFCWS, FVDW)
Format Free 2.0 | Windows/Mac Viewer
2K QHD RESOLUTION
High-quality image processor captures crystal clear video in 2K QHD, 30fps.
* Optional Full HD rear view camera is sold separately.
150˚ WIDE VIEWING ANGLE
150-degree wide viewing angle lens will minimize blind spots to ensure all events are recorded.
* Optional Full HD rear view camera is sold separately.
SONY EXMOR R STARVIS
IMAGE SENSOR
Perfect image processing even in low-light environments.
The Sony Exmor R STARVIS Image Sensor applied to the X800 provides rich colours and excellent resolution.
STARVIS technology improves Exmor R's low light sensitivity by providing improve image quality in the visible and
near-infrared spectrum, allowing clear imaging in low light environments.
SUPER NIGHT VISION 2.0
DASH CAM videos recorded in a low-light environments, such as dark alleys or parking lots, may not be clearly identifiable. SUPER NIGHT VISION2.0 in the X800 uses Image Signal Processing (ISP) technology to record a clear, visible video in most situations- while driving or parked. The 2.0 version now allows for use in Continuous Mode as well as the original Parking Mode
- Comparison of Driving Recordings
- Comparison of Parking Recordings
STATE OF THE ART
VIDEO ENHANCEMENT TECHNOLOGY
Thinkware Dash Cams are equipped with the best video enhancement technology on the market,
ensuring the most vivid video recordings under any circumstance.
PARKING SURVEILLANCE MODE
Parking Surveillance mode is automatically activated when you turn off the ignition and captures footage when motion or an impact is detected, so you have video evidence of mishaps like hit-and-runs while you’re away from your vehicle. *Requires Hardwiring Cable or OBD II Power Cable installation for Parking Surveillance mode (professional installation recommended)
ENERGY SAVING MODE
In Energy Saving mode, the dash cam goes into standby when entering Parking Surveillance mode and wakes up to record events triggered by impacts only. When in use, the X800 will go into sleep and soon after an impact has been detected by the built-in G-senor, the X800 will wake up within a second and start recording for the next 20 seconds. This allows the dash cam to conserve energy and increase the total duration of the dash cam’s Parking Surveillance mode by up to 3 times.
TIME LAPSE MODE
Time Lapse in Parking mode records footage at 2FPS, enabling the dash cam to record
longer periods of parking surveillance continuously without increasing power consumption.
2.7” LCD TOUCHSCREEN VIEWER
Time Lapse in Parking mode records footage at 2FPS, enabling the dash cam to record
longer periods of parking surveillance continuously without increasing power consumption.
SAFETY CAMERA ALERT
The THINKWARE DASH CAM X800 external GPS provides accurate location information enabling the Safety Camera Alert function to be on continuous alert to warn the driver of red light and traffic enforcement cameras. Cultivate safe driving habits with THINKWARE DASH CAM.
*Optional Full HD rearview camera is sold separately
MEMORY SAVING MODE
memory saving mode reduces the file size of the driving video by 45% each,
and increases the recording time from 105min hours to 198min hours
*Based on 32GB memory card
ROAD SAFETY WARNING SYSTEM
The Thinkware Dash Cam X800 is equipped with Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System (uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with a voice alerts.
*Optional Full HD rearview camera is sold separately Read More
HIGH-TEMPERATURE PROTECTION SYSTEM
The specially designed heat discharge construction and the built-in thermal sensor of the X800 protects
the device and its data against intense heat by automatically turning itself off to prevent overheating.
VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO
The intuitive and simple-to-use interface of THINKWARE DASH CAM’s PC Viewer allows for easy and convenient viewing of your recorded videos. Through the PC or Mac viewer, you can play back and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
FAIL-SAFE RECORDING
In the event that the power gets disconnected after an accident, the fail-safe recording uses
the Super Capacitor for backup power to ensure safe storage of any recording in progress – so you can be
assured that your valuable data will be securely stored under any circumstances.
PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
DImension | Weight | Package |
|---|---|---|
100.3*55.5*29.8 mm(4.0*2.1*1.1 inch) | 104g (0.23lbs) | Main Dash Cam Unit, Mount with 3M tape (1ea), Power Cable, Adhesive Cable Holders (3ea), MicroSD memory card with adapter(consumable), Quick Start Guide/Warranty Card, Spare 3M tape (1ea) |
DETAILED SPECIFICATIONS
ETC | Operation Status LED |
Power | Input Power : DC 12/24V |
GPS | External GPS receiver (Optional) |
Sensor | 3-Axis Accelerometer G-Sensor (3D, ±3G) |
Recording Modes | Continuous Recording, Incident Recording, Manual Recording, Parking Recording, Audio Recording |
Capacity | Micro SD Card Class10, 32GB / 256GB |
Display Panel | 2.7” Touch LCD (Resistive) |
Resolution | Front: QHD (2560 x 1440), Rear: Full HD (1920 x 1080) |
Camera | Front: Sony CMOS 5.14M Pixels, Rear: Pixelplus CMOS 2.12M Pixels |